CheckMKServer¶
A server that listens for incoming check_mk connection and processes incoming requests.
Configuration¶
Path / Section | Description |
---|---|
/settings/check_mk/server | CHECK MK SERVER SECTION |
/settings/check_mk/server/scripts | REMOTE TARGET DEFINITIONS |
/settings/default |
CHECK MK SERVER SECTION ¶
Section for check_mk (CheckMKServer.dll) protocol options.
Key | Default Value | Description |
---|---|---|
allowed ciphers | ALL:!ADH:!LOW:!EXP:!MD5:@STRENGTH | ALLOWED CIPHERS |
allowed hosts | 127.0.0.1 | ALLOWED HOSTS |
bind to | BIND TO ADDRESS | |
ca | ${certificate-path}/ca.pem | CA |
cache allowed hosts | true | CACHE ALLOWED HOSTS |
certificate | ${certificate-path}/certificate.pem | SSL CERTIFICATE |
certificate format | PEM | CERTIFICATE FORMAT |
certificate key | SSL CERTIFICATE | |
dh | ${certificate-path}/nrpe_dh_512.pem | DH KEY |
port | 6556 | PORT NUMBER |
socket queue size | 0 | LISTEN QUEUE |
ssl options | VERIFY MODE | |
thread pool | 10 | THREAD POOL |
timeout | 30 | TIMEOUT |
use ssl | false | ENABLE SSL ENCRYPTION |
verify mode | none | VERIFY MODE |
# Section for check_mk (CheckMKServer.dll) protocol options. [/settings/check_mk/server] allowed ciphers=ALL:!ADH:!LOW:!EXP:!MD5:@STRENGTH allowed hosts=127.0.0.1 ca=${certificate-path}/ca.pem cache allowed hosts=true certificate=${certificate-path}/certificate.pem certificate format=PEM dh=${certificate-path}/nrpe_dh_512.pem port=6556 socket queue size=0 thread pool=10 timeout=30 use ssl=false verify mode=none
ALLOWED CIPHERS ¶
The chipers which are allowed to be used. The default here will differ is used in “insecure” mode or not. check_nrpe uses a very old chipers and should preferably not be used. For details of chipers please see the OPEN ssl documentation: https://www.openssl.org/docs/apps/ciphers.html
Key | Description |
---|---|
Path: | /settings/check_mk/server |
Key: | allowed ciphers |
Advanced: | Yes (means it is not commonly used) |
Default value: | ALL:!ADH:!LOW:!EXP:!MD5:@STRENGTH |
Used by: | CheckMKServer |
Sample:
[/settings/check_mk/server] # ALLOWED CIPHERS allowed ciphers=ALL:!ADH:!LOW:!EXP:!MD5:@STRENGTH
ALLOWED HOSTS ¶
A comma separated list of allowed hosts. You can use netmasks (/ syntax) or * to create ranges. parent for this key is found under: /settings/default this is marked as advanced in favor of the parent.
Key | Description |
---|---|
Path: | /settings/check_mk/server |
Key: | allowed hosts |
Advanced: | Yes (means it is not commonly used) |
Default value: | 127.0.0.1 |
Used by: | CheckMKServer |
Sample:
[/settings/check_mk/server] # ALLOWED HOSTS allowed hosts=127.0.0.1
BIND TO ADDRESS ¶
Allows you to bind server to a specific local address. This has to be a dotted ip address not a host name. Leaving this blank will bind to all available IP addresses. parent for this key is found under: /settings/default this is marked as advanced in favor of the parent.
Key | Description |
---|---|
Path: | /settings/check_mk/server |
Key: | bind to |
Advanced: | Yes (means it is not commonly used) |
Default value: | N/A |
Used by: | CheckMKServer |
Sample:
[/settings/check_mk/server] # BIND TO ADDRESS bind to=
CA ¶
Key | Description |
---|---|
Path: | /settings/check_mk/server |
Key: | ca |
Advanced: | Yes (means it is not commonly used) |
Default value: | ${certificate-path}/ca.pem |
Used by: | CheckMKServer |
Sample:
[/settings/check_mk/server] # CA ca=${certificate-path}/ca.pem
CACHE ALLOWED HOSTS ¶
If host names (DNS entries) should be cached, improves speed and security somewhat but won’t allow you to have dynamic IPs for your Nagios server. parent for this key is found under: /settings/default this is marked as advanced in favor of the parent.
Key | Description |
---|---|
Path: | /settings/check_mk/server |
Key: | cache allowed hosts |
Advanced: | Yes (means it is not commonly used) |
Default value: | true |
Used by: | CheckMKServer |
Sample:
[/settings/check_mk/server] # CACHE ALLOWED HOSTS cache allowed hosts=true
SSL CERTIFICATE ¶
Key | Description |
---|---|
Path: | /settings/check_mk/server |
Key: | certificate |
Advanced: | Yes (means it is not commonly used) |
Default value: | ${certificate-path}/certificate.pem |
Used by: | CheckMKServer |
Sample:
[/settings/check_mk/server] # SSL CERTIFICATE certificate=${certificate-path}/certificate.pem
CERTIFICATE FORMAT ¶
Key | Description |
---|---|
Path: | /settings/check_mk/server |
Key: | certificate format |
Advanced: | Yes (means it is not commonly used) |
Default value: | PEM |
Used by: | CheckMKServer |
Sample:
[/settings/check_mk/server] # CERTIFICATE FORMAT certificate format=PEM
SSL CERTIFICATE ¶
Key | Description |
---|---|
Path: | /settings/check_mk/server |
Key: | certificate key |
Advanced: | Yes (means it is not commonly used) |
Default value: | N/A |
Used by: | CheckMKServer |
Sample:
[/settings/check_mk/server] # SSL CERTIFICATE certificate key=
DH KEY ¶
Key | Description |
---|---|
Path: | /settings/check_mk/server |
Key: | dh |
Advanced: | Yes (means it is not commonly used) |
Default value: | ${certificate-path}/nrpe_dh_512.pem |
Used by: | CheckMKServer |
Sample:
[/settings/check_mk/server] # DH KEY dh=${certificate-path}/nrpe_dh_512.pem
PORT NUMBER ¶
Port to use for check_mk.
Key | Description |
---|---|
Path: | /settings/check_mk/server |
Key: | port |
Default value: | 6556 |
Used by: | CheckMKServer |
Sample:
[/settings/check_mk/server] # PORT NUMBER port=6556
LISTEN QUEUE ¶
Number of sockets to queue before starting to refuse new incoming connections. This can be used to tweak the amount of simultaneous sockets that the server accepts. parent for this key is found under: /settings/default this is marked as advanced in favor of the parent.
Key | Description |
---|---|
Path: | /settings/check_mk/server |
Key: | socket queue size |
Advanced: | Yes (means it is not commonly used) |
Default value: | 0 |
Used by: | CheckMKServer |
Sample:
[/settings/check_mk/server] # LISTEN QUEUE socket queue size=0
VERIFY MODE ¶
Comma separated list of verification flags to set on the SSL socket.
default-workarounds Various workarounds for what I understand to be broken ssl implementations no-sslv2 Do not use the SSLv2 protocol. no-sslv3 Do not use the SSLv3 protocol. no-tlsv1 Do not use the TLSv1 protocol. single-dh-use Always create a new key when using temporary/ephemeral DH parameters. This option must be used to prevent small subgroup attacks, when the DH parameters were not generated using “strong” primes (e.g. when using DSA-parameters).
Key | Description |
---|---|
Path: | /settings/check_mk/server |
Key: | ssl options |
Advanced: | Yes (means it is not commonly used) |
Default value: | N/A |
Used by: | CheckMKServer |
Sample:
[/settings/check_mk/server] # VERIFY MODE ssl options=
THREAD POOL ¶
parent for this key is found under: /settings/default this is marked as advanced in favor of the parent.
Key | Description |
---|---|
Path: | /settings/check_mk/server |
Key: | thread pool |
Advanced: | Yes (means it is not commonly used) |
Default value: | 10 |
Used by: | CheckMKServer |
Sample:
[/settings/check_mk/server] # THREAD POOL thread pool=10
TIMEOUT ¶
Timeout when reading packets on incoming sockets. If the data has not arrived within this time we will bail out. parent for this key is found under: /settings/default this is marked as advanced in favor of the parent.
Key | Description |
---|---|
Path: | /settings/check_mk/server |
Key: | timeout |
Advanced: | Yes (means it is not commonly used) |
Default value: | 30 |
Used by: | CheckMKServer |
Sample:
[/settings/check_mk/server] # TIMEOUT timeout=30
ENABLE SSL ENCRYPTION ¶
This option controls if SSL should be enabled.
Key | Description |
---|---|
Path: | /settings/check_mk/server |
Key: | use ssl |
Default value: | false |
Used by: | CheckMKServer |
Sample:
[/settings/check_mk/server] # ENABLE SSL ENCRYPTION use ssl=false
VERIFY MODE ¶
Comma separated list of verification flags to set on the SSL socket.
none The server will not send a client certificate request to the client, so the client will not send a certificate. peer The server sends a client certificate request to the client and the certificate returned (if any) is checked. fail-if-no-cert if the client did not return a certificate, the TLS/SSL handshake is immediately terminated. This flag must be used together with peer. peer-cert Alias for peer and fail-if-no-cert. workarounds Various bug workarounds. single Always create a new key when using tmp_dh parameters. client-once Only request a client certificate on the initial TLS/SSL handshake. This flag must be used together with verify-peer
Key | Description |
---|---|
Path: | /settings/check_mk/server |
Key: | verify mode |
Advanced: | Yes (means it is not commonly used) |
Default value: | none |
Used by: | CheckMKServer |
Sample:
[/settings/check_mk/server] # VERIFY MODE verify mode=none
REMOTE TARGET DEFINITIONS ¶
This is a section of objects. This means that you will create objects below this point by adding sections which all look the same.
/settings/default ¶
Key | Default Value | Description |
---|---|---|
allowed hosts | 127.0.0.1 | ALLOWED HOSTS |
bind to | BIND TO ADDRESS | |
cache allowed hosts | true | CACHE ALLOWED HOSTS |
encoding | NRPE PAYLOAD ENCODING | |
inbox | inbox | INBOX |
password | PASSWORD | |
socket queue size | 0 | LISTEN QUEUE |
thread pool | 10 | THREAD POOL |
timeout | 30 | TIMEOUT |
# [/settings/default] allowed hosts=127.0.0.1 cache allowed hosts=true inbox=inbox socket queue size=0 thread pool=10 timeout=30
ALLOWED HOSTS ¶
A comma separated list of allowed hosts. You can use netmasks (/ syntax) or * to create ranges.
Key | Description |
---|---|
Path: | /settings/default |
Key: | allowed hosts |
Default value: | 127.0.0.1 |
Used by: | CheckMKServer, NRPEServer, NSCAServer, NSClientServer, WEBServer |
Sample:
[/settings/default] # ALLOWED HOSTS allowed hosts=127.0.0.1
BIND TO ADDRESS ¶
Allows you to bind server to a specific local address. This has to be a dotted ip address not a host name. Leaving this blank will bind to all available IP addresses.
Key | Description |
---|---|
Path: | /settings/default |
Key: | bind to |
Default value: | N/A |
Used by: | CheckMKServer, NRPEServer, NSCAServer, NSClientServer, WEBServer |
Sample:
[/settings/default] # BIND TO ADDRESS bind to=
CACHE ALLOWED HOSTS ¶
If host names (DNS entries) should be cached, improves speed and security somewhat but won’t allow you to have dynamic IPs for your Nagios server.
Key | Description |
---|---|
Path: | /settings/default |
Key: | cache allowed hosts |
Default value: | true |
Used by: | CheckMKServer, NRPEServer, NSCAServer, NSClientServer, WEBServer |
Sample:
[/settings/default] # CACHE ALLOWED HOSTS cache allowed hosts=true
NRPE PAYLOAD ENCODING ¶
Key | Description |
---|---|
Path: | /settings/default |
Key: | encoding |
Advanced: | Yes (means it is not commonly used) |
Default value: | N/A |
Used by: | CheckMKServer, NRPEServer, NSCAServer, NSClientServer, WEBServer |
Sample:
[/settings/default] # NRPE PAYLOAD ENCODING encoding=
INBOX ¶
The default channel to post incoming messages on
Key | Description |
---|---|
Path: | /settings/default |
Key: | inbox |
Default value: | inbox |
Used by: | CheckMKServer, NRPEServer, NSCAServer, NSClientServer, WEBServer |
Sample:
[/settings/default] # INBOX inbox=inbox
PASSWORD ¶
Password used to authenticate against server
Key | Description |
---|---|
Path: | /settings/default |
Key: | password |
Default value: | N/A |
Used by: | CheckMKServer, NRPEServer, NSCAServer, NSClientServer, WEBServer |
Sample:
[/settings/default] # PASSWORD password=
LISTEN QUEUE ¶
Number of sockets to queue before starting to refuse new incoming connections. This can be used to tweak the amount of simultaneous sockets that the server accepts.
Key | Description |
---|---|
Path: | /settings/default |
Key: | socket queue size |
Advanced: | Yes (means it is not commonly used) |
Default value: | 0 |
Used by: | CheckMKServer, NRPEServer, NSCAServer, NSClientServer, WEBServer |
Sample:
[/settings/default] # LISTEN QUEUE socket queue size=0
THREAD POOL ¶
Key | Description |
---|---|
Path: | /settings/default |
Key: | thread pool |
Advanced: | Yes (means it is not commonly used) |
Default value: | 10 |
Used by: | CheckMKServer, NRPEServer, NSCAServer, NSClientServer, WEBServer |
Sample:
[/settings/default] # THREAD POOL thread pool=10
TIMEOUT ¶
Timeout when reading packets on incoming sockets. If the data has not arrived within this time we will bail out.
Key | Description |
---|---|
Path: | /settings/default |
Key: | timeout |
Default value: | 30 |
Used by: | CheckMKServer, NRPEServer, NSCAServer, NSClientServer, WEBServer |
Sample:
[/settings/default] # TIMEOUT timeout=30